I wanna say first i made none of the these meshes.i only converted them (with permission) from the original creator meshes credits to: clichegothe (original tail), dr. Pixel (smaller fairy wings) and Fantasim (who i could not get a hold of but on her site she said it was okay to redistribute as long as proper credit was given) *sims 1 converted meshes okay now the technical people: credit to wes for his awesome pligin, miche and delphy for their efforts for sims 2 meshing, and of course the creator of milkshape okay now a description: two fairy meshes and a tail i am planning on making a family if sims (child, toddler, male, etc.) for each of these things but it will take time and i wanted to beta test these first. I tested the tail in my game and it was perfect but i have yet to get to the fairies feel free to retexture and redistribute the textures as what is on them is just textures i had laying around known issues: there is the ever so famolus gap between the body and the head.i don't know how to get rid of this yet also the alpha's are not uv mapped (the wings and tail will be flesh colored until you edit them).i couldn't get it to work so if someone can do this i would be grateful UPDATE!!! Okay i made a set of wings that will go with any age and any gender.it's on a glasses mesh. Any younger than teen however will be to far away from the body.sorry about that.

This one comes with a uv map all done for ya to mess with. Chu Cha Cha Song Free Download Sing Is Bling here. There is a slight protrusion on the back where the wings should connect to the body but i can not get it to be fixed.the wings are still attached to the body but the bottom part of the wings juts out a bit.

I am leaving the previous versions for those of you that do not want the new mesh. 4-8 okay i got bored again and decided to make this cool little fairy outfit. The wings are smaller, her boobs are bigger, and she has earrings. The mesh is a ittle tweaked but for some reason it won't flatten out right.oh well. If you want it or if you wanna fix it go ahead.post here so others can find it. This one has a nice uv map (i figured out how to do it ) she doesn't come with the hair or the corwn.if you want the corwn it is in a nother thread and the hair has not yet been released.

[1.6.2][Forge]Invasion ModBeta 0.12.0(With SMP) -Armor recommended >>Updated for 1.6.2, added modpack permission info. Quick Download Section Direct downloads, full instructions, etc are in the download section further down the post. Keep this in mind: one adfly click feeds me for a couple minutes.

Feel free to recolor and redistribute. Basic Download and Install Instructions: 1.

Download: Click the download link to save the.rar or.zip file(s) to your computer. Extract: Use (Windows) or (Mac) to extract the.package file(s) from the.rar or.zip file(s).

Place in Downloads Folder: Cut and paste the.package file(s) into your Downloads folder: • Windows XP: Documents and Settings (Current User Account) My Documents EA Games The Sims 2 Downloads • Windows Vista/7/8: Users (Current User Account) Documents EA Games The Sims 2 Downloads • Mac: Users (Current User Account) Documents EA Games The Sims 2 Downloads -or- 4.

Hi guys, Welcome to my another instructables. Today in this instructable we are going to make something really useful and very cool thing a IR Remote Controlled Home Automation System. The reason i come up with this idea is, i hate to turn on and off my switches in my garage. Because the switch board is little far away from my work bench, So every time to turn on or off my light or something i really need to stand up and go to switch board.

It is a horrible problem when i working with something in my garage. So i decided to find a way to solve my problem. I come up with a home automation device. The best way is to use a IR remote to control through this, i can control multiple devices.

The work bench and switch board is approximately about 3 meter away so it will work fine. Using this device you can also control any home appliances like TV, Fan, Lights etc.

It does not cost me enough, i just spend about 15$ or less to make this device.So guys it is super cheep and very useful. So what you waiting for lets roll. Step 1: Collect the Parts. The first and primary step is to collect the necessary parts that we needed to do this project. The parts are super cheap.You can collect from your nearest radioshack.

Here Is The Parts You Needed To Collect:- • Arduino uno (or you can make a Diy arduino from ). • Relay Module (you can make one yourself from ).• Mini BreadBoard. • Jumper Wire(male to male).

• TSOP1738(or any equivalent), • Buzzer(optional, used for notification). • General Purpose PCB(only need a small piece). • Male Header Pin(three pin). Other Tools Needed:- • Soldering Iron. • Soldering Wire. • Soldering paste. • Box(used as enclosure for the device).

• Utility Knife and glue. I think that's all we needed.

Warning:- In this instructables we are dealing with high voltage so, do not proceed this instructable without wearing safety glass and gloves. Now lets head to the next step. Step 2: Solder IR Sensor on the PCB.

In this step we need to solder the TSOP1738 IR sensor to a small piece of PCB. Like the image given above. I know it can directly plug to arduino but some cases the pin will break and the sensor will useless to us, to prevent this i just soldered the TSOP1738 on a small piece of PCB with male header pins, so i can use it like a sensor module. It is not hard enough to make, see the above images and make one yourself. After you make one lets jump to the next step.

Step 3: Download and Install IR Library. Before we proceeding to next upcoming steps. We need to install IRremote library in Arduino IDE.This library is necessary to do this instructable. To install the Library in your Arduino IDE keep below steps:- • First download the IRremote library file from. Un Dos Tres Torrent Saison 5 Girls here.

• Extract the file using the winrar or 7zip. • After extracting you will get a folder named IRremote. • Copy the folder to your arduino installed folder, in my case it is C:/Program Files/arduino-16.8• Then open the folder called Libraries.• Paste the IRremote folder there. We done we just installed the IRremote library. Lets go to the next step now. Step 4: Get Hex Code From Remote. Now its time for wiring the arduino and other components together!

See the above schematics and carefully connect all the parts to the arduino. I used some jumper wires to wire the components. It is a pretty easy, does not have any complicated connections. You can use a mini breadboard to wire up the arduino and component together easily.

Here i explain by parts:- • TSOP1738 GND(pin1) To Arduino GND• TSOP1738 VCC(pin2) To Arduino 3.3v• TSOP1738 OUT(pin3) To Arduino D12 • • Buzzer GND To Arduino GND• Buzzer VCC To Arduino D10 • Relay Module GND To Arduino GND• Relay Module VCC To Arduino 5v• Relay Module OUT To Arduino D7 Warning:(do not connect the bulb or any home appliances to the relay module out now!) After wiring the parts together lets move to the next step! Step 6: Arduino Sketch. So we are uploaded the arduino sketch to arduino board.

Now we should check if it is work or not. Deeply check there is any wrong connections exist, if not then just power up your arduino board. Now take your IRremote and press the button that you used in the previous steps. If the relay turn on and hear a beep sound from buzzer, its all fine lets go to the next step. Else is there any problem in working, carefully check once again the connections and also the arduino sketch.

Then power the arduino once again and check it. After the successful testing lets go to the next step. Step 8: Find a Enclosure.